Release: 7/6/2022

• Fixes Top View ARGB flickering issue with EVGA GeForce RTX 3090 Ti FTW3 cards

下载连结

Release: 6/28/2022

• Adds support for PowerLink LED with EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3
• Adds support for EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3 HYBRID Fan LED

下载连结

Release: 6/14/2022

• Adds support for the GeForce RTX 3090 Ti K|NGP|N HYBRID

下载连结

Release: 4/29/2022

• Adds support for the RTX 3090 Ti FTW3 ULTRA HYBRID GAMING

下载连结

Release: 3/29/2022

• Supports RTX 3090 Ti FTW3 Series
• Fixes issue where OC Scan could not display the correct progress on multi-card systems
• Adds OSD support for Fortnite with Easy Anti-Cheat
• Fixes K|NGP|N upload .gif animation crash (more than 256 colors)
• Fixes OS version displayed on Windows 11 systems.

下载连结

Release: 2/18/2022

• Update Resizable BAR database with newer part numbers for BIOS version check
• Updates MCU database for firmware updater
• Assorted bug fixes

下载连结

Release: 12/17/2021

• Changes the UI frame.
• Installer now provides an option to "Create Desktop Shortcut".
• Precision X1 now opens to the last saved position.
• User can now arrange VGA icons via drag and drop if user has more than one card installed.
• Fixes issue where LED status does not save during reboot.
• Fixes Precision X1 crash when logging in via Remote Desktop.

下载连结

Release: 11/23/2021

• VF curve editor added ToolTip for Mode 1 & 2.
• Fixed an issue relating to the position of the Clock Offset Mode 2 Y-axis value.
• VF curve editor now supports zoom in /out.
• VF curve editor now supports up / down key to fine tune.

下载连结

下载版本

Release: 11/10/2021

• Clip VF curve area
• Show 0 in Y-Axis of Clock offset mode 2
• Update VF Curve tooltip

下载连结

Release: 11/8/2021

• Adds support for a VF Curve Editor
• Sync framerate limit with NVIDIA Control Panel and sets max value to 1000FPS
• Fixes issue where LED temperature mode fails and resets to rainbow mode
• Fixes issue where the VF curve value is cleared when Apply is used on another page

下载连结

Release: 9/7/2021

• Adds "Link All Fan Curves" to software fan control function

下载连结

Release: 8/25/2021

1. Updates EVGA iCX firmware for improved monitoring accuracy.

下载连结

Release: 8/10/2021

• Enlarged hardware monitor readings in system tray
• Adds new BIOS update for RTX 3080 Ti XC3 cards to improve performance (Available via Resizable BAR menu)
• Updates tooltip duration to show for 60 seconds
• Fixes fan control Preset mode to save after leaving the menu
• Assorted typos fixed

下载连结

Release: 7/28/2021

• Adds RTX 3080 Ti & RTX 3060 12G Resizable BAR BIOS update upgrade

下载连结

Release: 6/23/2021

• Adds EVGA GeForce RTX 3060 XC update for Resizable BAR BIOS
• Adds AMD & Intel CPU Temperature monitor support.
• Fixes OC Scan first time fail issue
• Displays an error message if user is running a 3D application during OC Scan

下载连结

Release: 6/2/2021

• Fix NVML.dll missing issue.
• Fix Resizable BAR Update BIOS crash issue.
• Support RTX 3080 Ti / RTX 3070 Ti series.

下载连结

Release: 5/13/2021

• Default fan speed will be set to 33% when auto mode is disabled.
• In Fan AUTO Mode, TextBox & Slider is disabled and now shows "AUTO" in TextBox
• All NVML.dll search paths are included to fix Resizable BAR detect fail issue.

下载连结

Release: 4/8/2021

• Adds MB BIOS CSM detection prior to update.
• 3070 XC3 Ultra BIOS updated to fix power limit issue.
• Sets a fixed speed for Ext Fan in auto mode.
• Fixes issue where "Apply Previous Setting" does not apply when Start with OS.

下载连结

Release: 3/30/2021

• Supports EVGA GeForce RTX 30 series Resizable BAR VBIOS update
• Adds Resizable BAR Status Check feature
• Fixes Task Scheduler issue

下载连结

Release: 2/1/2021

• Fixes Power / GPU temperature target link issue
• Fixes fan link issue

下载连结

Release: 1/21/2021

• Fix incorrect firmware being applied in some situations.

下载连结

Release: 1/15/2021

• RTX 30 Series RGB support for up to 4 Graphics Cards
• RGB Color Stack can now choose direction
• FTW3 Temp Mode now supports 3 areas
• Supports upcoming Kingpin HC card

下载连结

Release: 12/15/2020

• Fixes crash on opening due to profile mismatch
• Fixes issue where the VF Curve does not save correctly

下载连结

Release: 12/14/2020

• Update firmware for FTW3 / XC3 LED fine-tune support.
• Fix KINGPIN iCX sensors read error issue
• Remove KINGPIN animation upload
• Fix lost MCU after firmware update
• Fix GTX 10 series OC Scan VF curve data issue
• Textbox input for fan speed

下载连结

Release: 11/26/2020

• Adds support for EVGA GeForce RTX 3090 K|NGP|N
• Various Bug Fixes

下载连结

Release: 11/6/2020

• Improves compatibility with GeForce Game Ready Driver 457.09

下载连结

Release: 10/16/2020

• Adds compatibility for previous generations supported by PX1
• Color Cycle & Color Stack allow user to select color number from 2 to 7

下载连结

Release: 10/8/2020

• Adds Precision UI Light Bar in General Setting
• Checks for GPU Fan Control
• Reduces CPU/GPU usage while PX1 is running
• Various bug fixes

下载连结

Release: 9/21/2020

• Update for XC3 firmware to reduce fan noise. (No impact to performance, or cooling.)
• Improved fan detection.
• DO NOT DOWNLOAD for previous series graphics cards

下载连结

Release: 9/17/2020

• Initial PX1 release for 30 Series ONLY
• DO NOT DOWNLOAD for previous series graphics cards

下载连结

Release: 7/31/2020

• Various bug fixes

下载连结

Release: 5/21/2020

• Fix Save profile crash issue on certain cards

下载连结

Release: 3/27/2020

• Adds support for additional RTX 2080 SUPER cards

下载连结

Release: 2/26/2020

• Update firmware for RTX 2080 Ti FTW3 HYBRID.
• Fixed where NVLink LED could not be controlled if the VGA does not support LED function.

下载连结

Release: 10/29/2019

• Improvements to the "Apply Previous Settings on Load" option. Now when this option is selected without selecting "Start with OS", Precision will auto load the last applied settings on system start.

下载连结

Release: 10/17/2019

• Fix Framerate Limiter bug.
• LED Sync support on RTX 20 Series.
• Fix profile deleted on new install issue.

下载连结

Release: 9/20/2019

• Improvements to "Boost Lock" feature for compatibility. To set a locked clock, once you enable Boost Lock, you set the clock using offsets.
• Now shows 4 digits on system tray OSD.
• Various other fixes.

下载连结

Release: 9/5/2019

• Improvements to "Boost Lock" feature to ensure max overclock.
• Improvements to EVGA GeForce RTX 2080 Ti K|NGP|N OLED display

下载连结

Release: 8/1/2019

• Adds new "Boost Lock" feature, this feature will allow you to lock the graphics card frequency to the highest performance state. Please note that SLI is not currently supported in this feature.

下载连结

Release: 7/18/2019

• Improves RTX 2080 Ti K|NGP|N Support
• Adds support for AMD Ryzen CPU temp monitoring
• Support for Z10 RGB LCD display
• Adds ability to disable splash screen on startup

下载连结

Release: 6/14/2019

• Adds support for Frame Rate Limiter (Frame Rate Target)
• Various other fixes

下载连结

Release: 5/13/2019

• Adds animated GIF support for K|NGP|N OLED
• Fixed bug where power target was not saving
• Improved fan control and support
• Fixed VGA2 voltage incorrect
• Various other fixes

下载连结

Release: 4/24/2019

• Fix online update error.
• Improved GeForce GTX 1660 Ti support
• Updated GeForce RTX 2080 Ti K|NGP|N Firmware
• Improved Compatibility with EVGA Z10 Keyboard
• Various other fixes

下载连结

Release: 4/16/2019

• Improved SLI compatibility with EVGA GeForce RTX 2080 Ti K|NGP|N
• Fixes bug with VF curve

下载连结

Release: 4/11/2019

• Various fixes for EVGA GeForce RTX 2080 Ti K|NGP|N
• Precision performance enhancements

下载连结

Release: 4/9/2019

• Adds full support for EVGA GeForce RTX 2080 Ti K|NGP|N and OLED control

下载连结

Release: 2/27/2019

• Adds support for Windows 8.1 and Windows 7
• Improved LED support
• Fixed voltage showing incorrectly on OSD
• Improved support for GeForce GTX 10 Series
• Improved support for GeForce RTX 2060
• Fixed “Start with OS” working directory set incorrect
• Improved support for EVGA NVLink SLI Bridge RGB

下载连结

Release: 12/26/2018

• Improved GeForce GTX 10 Series support
• Improved support for EVGA HYBRID cards
• Fix profile crash issue
• OC Scanner Improvements
• Adds support for Traditional / Simplified Chinese language

下载连结

Release: 12/7/2018

• Adds BETA support for GeForce GTX 10 Series cards. Please note this release does not yet support iCX Monitoring or LED functionality for 10 series.
• Adds support for Intel CPU temperature monitor.
• Adds “Stealth” mode in fan curve preset to allow for lower fan noise.
• Improve OSD hook functionality.

下载连结

Release: 11/28/2018

• Fix issue with MCU updater not properly updating some cards

下载连结

Release: 11/15/2018

• Improvements to MCU updater
• Improvements to OSD
• Fix for profiles not saving on some system setups

下载连结

Release: 11/13/2018

• UI improvements on MCU updater
• Fixed external fan RPM error
• Update temperature hysteresis range from 0°C to 15°C
• Fix issue with saved profiles being lost
• Various other fixes for fan control

下载连结

Release: 11/2/2018

• Fix issue with MCU updater sometimes not properly updating
• Fix issue with Profiles not saving fan speeds
• Add support to see which version of MCU's are applied

下载连结

Release: 10/29/2018

• Fix issue with MCU updater sometimes not properly updating
• Fix issue with RGB color disappearing for some users
• Fix issue with RTX 20-Series FTW3 cards and fanspeed control

下载连结

Release: 10/19/2018

• Fix issue with not detecting card on some occasions
• Supports real time power consumption for FTW3 cards
• Minor GUI Update

下载连结

Release: 10/12/2018

• Profile will now be highlighted when set (Use right mouse button to delete profile)
• OC Scan and Test results are saved to profiles

下载连结

Release: 10/10/2018

• Add full support for iCX2
• Save/Load buttons are now used to save and load profiles.
• Fix issue with Hot Keys

下载连结

Release: 10/2/2018

• Please note this version ONLY supports GeForce RTX graphics cards. GeForce GTX support coming soon.
• Adds support for Framerate and Frametime monitoring.
• Improved RGB LED support.

下载连结

Release: 9/26/2018

• Please note this version ONLY supports GeForce RTX graphics cards. GeForce GTX support coming soon.
• Improved RGB LED control
• Fix issue with savings not applying after reboot
• Various other fixes

下载连结

Release: 9/21/2018

• Please note this version ONLY supports GeForce RTX graphics cards. GeForce GTX support coming soon.

下载连结

Release: 9/20/2018

• Initial release – Please note this version ONLY supports GeForce RTX graphics cards. GeForce GTX support coming soon.

下载连结